Meaf Machines B.V.

Welcome to Meaf Machines B.V.

Save up to 675.000 kWh annually on your energy consumption!

Accumulator / Buffer

The accumulator (or buffer) has the function of storing the sheet during a roll change, without stopping the complete extrusion line, but it can also be used as additional cooling track. The accumulator is available with a buffer length of 36 m and 50 m. An accumulator is recommended for a sheet extrusion line with line speeds > 25 meters/min.

The accumulator is composed of:

  • Rollers built in aluminium complete with shaft and bearings;
  • One servomotor with gear reductor used for moving the rollers up and down to store the sheet;
  • Photo-electric sensor to detect the position of the rollers;
  • Protective shielding around the accumulator with lockable entrance door.


Width of the sheet max. 2.000 mm Storage of the sheet 36m or 50m Driven by Servo motor with toothed belt